Scaffold Tie Tester Kit | ADI Scaffold Fixings https://www.scaffoldfixings.co.uk Scaffold brackets, fixings and accessories Mon, 18 May 2026 12:49:15 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.scaffoldfixings.co.uk/wp-content/uploads/2022/01/cropped-adi-favicon-32x32.png Scaffold Tie Tester Kit | ADI Scaffold Fixings https://www.scaffoldfixings.co.uk 32 32 M2000 Scaffold Tie Tester Kit (Digital) – SCETESTDIG https://www.scaffoldfixings.co.uk/product/scaffold-tester-kit-scetestdig/ Tue, 11 Dec 2018 09:18:33 +0000 http://www.scaffoldfixings.co.uk/?post_type=product&p=527 The Hydrajaws M2000 Scaffold Tie Tester Kit is a specific kit allowing Scaffolders to test all common scaffold anchors and fixings in general use today, in line with NASC Guidance Note TG4:19. Manufactured to exacting high standards, the kit contains adaptors to test the most commonly used anchors used for scaffold ties up to a maximum tensile load of 25kN.

The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent. Trusted by the best scaffolding companies in the world, the M2000 Scaffold Tie Tester Kit is an essential tool for any scaffolder wanting to comply with current health and safety practices.

Compatible with the Hydrajaws App - Bluetooth Digital Reporting System when used with our digital gauge.

The post M2000 Scaffold Tie Tester Kit (Digital) – SCETESTDIG first appeared on Scaffold Fixings.

]]> Features

  • 0-25kN Dual Scale digital gauge compatible with the latest Hydrajaws App (detachable for calibration, reduces carrier return costs).
  • 2020 Load spreading bridge featuring height adjustable legs with pin arrangement in four positions with swivel feet giving 15mm of fine adjustment.
  • Turning Handle with 22mm (7/8″) integrated nut (for use in confined spaces).
  • Up to 50mm of stroke.
  • The tester is preassembled and accessories can be quickly attached with ease
  • Hydrajaws gauge calibration certificate (valid for 12 months).
  • Supplied in a robust protective carry case with full operating instructions.

Kit includes the following adaptors:

  • M12 Ringbolt adaptor clevis.
  • Bolt tester adaptor with M12 locking adaptor.
  • M16 Threaded stud adaptor.
  • M16 Hexagon Set Screw.
  • M16 Threaded Stud.

The National Access & Scaffolding Confederation (NASC) is the trade body for access and scaffolding in the UK. The NASC Guidance Note ‘TG4:19 – Anchorage Systems for Scaffolding’ sets out requirements for two types of test:

  • PRELIMINARY TESTS of scaffold anchors – to check the suitability and allowable loads of an anchor type in a particular base material
  • PROOF TESTS – sample tests to check that anchors have been installed correctly – to be carried out on all jobs.
The TG4:19 describes a proof Load testing requirement is for a tensile test of 1.5 x the design load. For heavy-duty ties with a capacity of 12.2kN this means a test load of 18.3kN.
Download the TG4:19 from the NASC site.

The post M2000 Scaffold Tie Tester Kit (Digital) – SCETESTDIG first appeared on Scaffold Fixings.

]]> M2000 Scaffold Tie Tester Kit (Analogue) – SCETESTANA https://www.scaffoldfixings.co.uk/product/m2000-scaffold-tie-tester-kit-analogue-scetestana/ Thu, 11 May 2023 11:35:37 +0000 https://www.scaffoldfixings.co.uk/?post_type=product&p=2871 The Hydrajaws M2000 Scaffold Tie Tester Kit is a specific kit allowing Scaffolders to test all common scaffold anchors and fixings in general use today, in line with NASC Guidance Note TG4:19. Manufactured to exacting high standards, the kit contains adaptors to test the most commonly used anchors used for scaffold ties up to a maximum tensile load of 25kN.

The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent. Trusted by the best scaffolding companies in the world, the M2000 Scaffold Tie Tester Kit is an essential tool for any scaffolder wanting to comply with current health and safety practices.

The post M2000 Scaffold Tie Tester Kit (Analogue) – SCETESTANA first appeared on Scaffold Fixings.

]]> Features

  • 0-25kN Dual Scale gauge (detachable for calibration, reduces carrier return costs).
  • 2020 Load spreading bridge featuring height adjustable legs with pin arrangement in four positions with swivel feet giving 15mm of fine adjustment.
  • Turning Handle with 22mm (7/8″) integrated nut (for use in confined spaces).
  • Up to 50mm of stroke.
  • The tester is preassembled and accessories can be quickly attached with ease
  • Hydrajaws gauge calibration certificate (valid for 12 months).
  • Supplied in a robust protective carry case with full operating instructions.

Kit includes the following adaptors:

  • M12 Ringbolt adaptor clevis.
  • Bolt tester adaptor with M12 locking adaptor.
  • M16 Threaded stud adaptor.
  • M16 Hexagon Set Screw.
  • M16 Threaded Stud.

The National Access & Scaffolding Confederation (NASC) is the trade body for access and scaffolding in the UK. The NASC Guidance Note ‘TG4:19 – Anchorage Systems for Scaffolding’ sets out requirements for two types of test:

  • PRELIMINARY TESTS of scaffold anchors – to check the suitability and allowable loads of an anchor type in a particular base material
  • PROOF TESTS – sample tests to check that anchors have been installed correctly – to be carried out on all jobs.
The TG4:19 describes a proof Load testing requirement is for a tensile test of 1.5 x the design load. For heavy-duty ties with a capacity of 12.2kN this means a test load of 18.3kN.
Download the TG4:19 from the NASC site.

The post M2000 Scaffold Tie Tester Kit (Analogue) – SCETESTANA first appeared on Scaffold Fixings.

]]> Bolt Tester Adaptor Scaffold 145mm – HYD1 https://www.scaffoldfixings.co.uk/product/bolt-fixing-adaptor-kit-hyd1/ Tue, 11 Dec 2018 09:22:38 +0000 http://www.scaffoldfixings.co.uk/?post_type=product&p=529 Product Designation :
HYD

Type :
Bolt Tester Adaptor

Material :
Mild Steel

Finish :
Bright Zinc Plated

The post Bolt Tester Adaptor Scaffold 145mm – HYD1 first appeared on Scaffold Fixings.

]]> Technical Information
The bolt tester adaptor directly engages the nut/bolt head in the pulling jaw.

The post Bolt Tester Adaptor Scaffold 145mm – HYD1 first appeared on Scaffold Fixings.

]]> M12 Ringbolt Adaptor Clevis 100mm Thread – HYD2 https://www.scaffoldfixings.co.uk/product/m12-ringbolt-adaptor-clev-hyd2/ Tue, 11 Dec 2018 09:26:38 +0000 http://www.scaffoldfixings.co.uk/?post_type=product&p=530

Product Designation :
HYD

Type :
Ringbolt Clevis Adaptor

Material :
Mild Steel

Finish :
Bright Zinc Plated

The post M12 Ringbolt Adaptor Clevis 100mm Thread – HYD2 first appeared on Scaffold Fixings.

]]> Technical Information
Clevis adaptor for testing ringbolts and eyebolts.

The post M12 Ringbolt Adaptor Clevis 100mm Thread – HYD2 first appeared on Scaffold Fixings.

]]> Set (of 3) 100mm Extension Legs M2000 – HYD4 https://www.scaffoldfixings.co.uk/product/set-3-100mm-extension-legs-hyd4/ Tue, 11 Dec 2018 09:30:39 +0000 http://www.scaffoldfixings.co.uk/?post_type=product&p=532 Product Designation :
HYD

Type :
Extension Legs

Material :
Mild Steel

Finish :
Bright Zinc Plated

The post Set (of 3) 100mm Extension Legs M2000 – HYD4 first appeared on Scaffold Fixings.

]]> Technical Information
Available in various sizes. The hex extension legs extend the reach of the Pull Tester.

The post Set (of 3) 100mm Extension Legs M2000 – HYD4 first appeared on Scaffold Fixings.

]]> Set (of 3) 50mm Extension Legs M2000 – HYD3 https://www.scaffoldfixings.co.uk/product/set-3-50mm-extension-legs-hyd3/ Tue, 11 Dec 2018 09:28:38 +0000 http://www.scaffoldfixings.co.uk/?post_type=product&p=531 Product Designation :
HYD

Type :
Extension Legs

Material :
Mild Steel

Finish :
Bright Zinc Plated

The post Set (of 3) 50mm Extension Legs M2000 – HYD3 first appeared on Scaffold Fixings.

]]>

Technical Information
Available in various sizes. The hex extension legs extend the reach of the Pull Tester.

The post Set (of 3) 50mm Extension Legs M2000 – HYD3 first appeared on Scaffold Fixings.

]]>